Leekabod Electronics Is Your One-stop Shop for Everything Electronic, From The Latest Gadgets and Gizmos to the Essential Appliances.
Our Contact Numbers Are: +263 78 431 3713, +263 78 957 3484, +263 71 409 0819
* Dust and Dirt: During the long, dry season, a significant layer of dust can accumulate on your panels.
* Bird Droppings: These can create concentrated "hot spots" and significantly block the cells underneath.
* Leaves and Debris: Especially after windy weather, leaves and small debris can get stuck on the panel surface.
Think of a thick layer of dust as shade. Even a thin film can lead to a noticeable drop in performance, meaning your system generates less power and you save less money.
The easiest thing you can do is to simply look at your panels regularly, perhaps once a month. From the safety of the ground, check for:
* An obvious layer of dust or dirt.
* Any significant bird droppings.
* Fallen leaves or other debris.
* Overhanging tree branches that may have grown and are now casting shadows on the panels.
This quick visual check will tell you if your panels are due for a clean or if your trees need a trim.
The Art of Cleaning Your Panels
If you've noticed your panels are dirty, a good cleaning can restore them to peak efficiency.
* When is the best time to clean?
The best time is either early in the morning or late in the evening when the panels are cool. NEVER clean your panels in the middle of a hot, sunny day. Spraying cold water on hot glass can cause thermal shock and damage the panels.
* What tools should you use?
Keep it simple. All you usually need is:
* A hosepipe with a standard nozzle (avoid high-pressure jets).
* A bucket of clean water.
* A soft brush, cloth, or squeegee with a long handle.
* The Cleaning Process:
1. Start by rinsing the panels with the hose to wash away loose dust.
2. If grime persists, use the soft brush and water to gently scrub the surface.
3. Rinse the panels again to wash away any remaining dirt.
4. You can let them air dry or use a squeegee to remove excess water.
* What should you NOT use?
NEVER use harsh, abrasive cleaning chemicals or rough sponges. These can scratch the glass or damage the anti-reflective coating. In most cases, clean water is all you need.
---
This is the most important rule of all. Your safety is paramount.
* Accessibility: You should only ever clean your panels yourself if you can do so safely and easily from the ground. DO NOT climb onto your roof to clean your panels. Roofs can be slippery and dangerous.
* Comprehensive Check-ups: While you can handle the cleaning, a solar system is more than just panels. The wiring, mounting, inverter, and batteries all need to be checked periodically.
We recommend a professional service and system check-up by Leekabod Electronics every 1-2 years. Our expert technicians will not only clean your panels safely, but they will also inspect all components of your system to ensure everything is operating correctly and efficiently, pre-empting any potential issues.
---
A little bit of care goes a long way. By keeping your panels clean and having your system professionally serviced, you ensure that your investment continues to provide you with maximum power and savings for many years to come.
Need a professional cleaning or a comprehensive system check-up? Trust the experts.
Visit us today at 𝟭𝟲 𝗕𝗲𝗮𝗹 𝗥𝗼𝗮𝗱, 𝗕𝗲𝗹𝘃𝗲𝗱𝗲𝗿𝗲, 𝗛𝗮𝗿𝗮𝗿𝗲 or contact us on:
📞 +263 78 431 3713 | +263 71 409 0819 | 078 957 3484
🌐 www.leekabod.co.zw
📧 leekabodelectronics@gmail.com
Leekabod Electronics: Powering Your Life, Brighter!
Leekabod Electronics Is Your One-stop Shop for Everything Electronic, From The Latest Gadgets and Gizmos to the Essential Appliances.
Our Contact Numbers Are: +263 78 431 3713, +263 78 957 3484, +263 71 409 0819
Our Contact Numbers Are: +263 78 431 3713, +263 78 957 3484, +263 71 409 0819
You’ve made one of the smartest investments for your home or business: a solar energy system.'
You've embraced the future, secured your energy independence, and are harnessing the free, abundant power of the Zimbabwean sun. But now comes a crucial question: how do you protect that investment and ensure it performs at its peak for decades to come?
One of the greatest advantages of solar power is that it is remarkably low-maintenance. However, "low-maintenance" does not mean "no-maintenance." Just like a car needs a regular oil change to run efficiently, your solar panels need a little care to continue generating maximum power.
One of the greatest advantages of solar power is that it is remarkably low-maintenance. However, "low-maintenance" does not mean "no-maintenance." Just like a car needs a regular oil change to run efficiently, your solar panels need a little care to continue generating maximum power.
 |
| Solar Panel Maintenance - The Expert's Guide to Protecting Your Investment |
As Zimbabwe's trusted solar experts, we at Leekabod Electronics believe that empowering you with knowledge is key. This is your simple, straightforward guide to solar panel maintenance.
Why Does Maintenance Matter? The Enemy of Efficiency
Your solar panels work by capturing sunlight. Anything that blocks that sunlight from reaching the solar cells will reduce the amount of electricity your system can produce. In Zimbabwe, the main culprits are:* Dust and Dirt: During the long, dry season, a significant layer of dust can accumulate on your panels.
* Bird Droppings: These can create concentrated "hot spots" and significantly block the cells underneath.
* Leaves and Debris: Especially after windy weather, leaves and small debris can get stuck on the panel surface.
Think of a thick layer of dust as shade. Even a thin film can lead to a noticeable drop in performance, meaning your system generates less power and you save less money.
Your Simple Maintenance Routine
The good news is that basic maintenance is easy and doesn't require a lot of time. Here’s what you need to know.The Visual Inspection - Your First Line of Defence
The easiest thing you can do is to simply look at your panels regularly, perhaps once a month. From the safety of the ground, check for:
* An obvious layer of dust or dirt.
* Any significant bird droppings.
* Fallen leaves or other debris.
* Overhanging tree branches that may have grown and are now casting shadows on the panels.
This quick visual check will tell you if your panels are due for a clean or if your trees need a trim.
The Art of Cleaning Your Panels
If you've noticed your panels are dirty, a good cleaning can restore them to peak efficiency.
* When is the best time to clean?
The best time is either early in the morning or late in the evening when the panels are cool. NEVER clean your panels in the middle of a hot, sunny day. Spraying cold water on hot glass can cause thermal shock and damage the panels.
* What tools should you use?
Keep it simple. All you usually need is:
* A hosepipe with a standard nozzle (avoid high-pressure jets).
* A bucket of clean water.
* A soft brush, cloth, or squeegee with a long handle.
* The Cleaning Process:
1. Start by rinsing the panels with the hose to wash away loose dust.
2. If grime persists, use the soft brush and water to gently scrub the surface.
3. Rinse the panels again to wash away any remaining dirt.
4. You can let them air dry or use a squeegee to remove excess water.
* What should you NOT use?
NEVER use harsh, abrasive cleaning chemicals or rough sponges. These can scratch the glass or damage the anti-reflective coating. In most cases, clean water is all you need.
---
Safety First: When to Call the Professionals
This is the most important rule of all. Your safety is paramount.
* Accessibility: You should only ever clean your panels yourself if you can do so safely and easily from the ground. DO NOT climb onto your roof to clean your panels. Roofs can be slippery and dangerous.
* Comprehensive Check-ups: While you can handle the cleaning, a solar system is more than just panels. The wiring, mounting, inverter, and batteries all need to be checked periodically.
We recommend a professional service and system check-up by Leekabod Electronics every 1-2 years. Our expert technicians will not only clean your panels safely, but they will also inspect all components of your system to ensure everything is operating correctly and efficiently, pre-empting any potential issues.
---
Protect Your Investment for the Long Haul
A little bit of care goes a long way. By keeping your panels clean and having your system professionally serviced, you ensure that your investment continues to provide you with maximum power and savings for many years to come.
Need a professional cleaning or a comprehensive system check-up? Trust the experts.
Visit us today at 𝟭𝟲 𝗕𝗲𝗮𝗹 𝗥𝗼𝗮𝗱, 𝗕𝗲𝗹𝘃𝗲𝗱𝗲𝗿𝗲, 𝗛𝗮𝗿𝗮𝗿𝗲 or contact us on:
📞 +263 78 431 3713 | +263 71 409 0819 | 078 957 3484
🌐 www.leekabod.co.zw
📧 leekabodelectronics@gmail.com
Leekabod Electronics: Powering Your Life, Brighter!
Leekabod Electronics Is Your One-stop Shop for Everything Electronic, From The Latest Gadgets and Gizmos to the Essential Appliances.
Our Contact Numbers Are: +263 78 431 3713, +263 78 957 3484, +263 71 409 0819
